烟台科诺机床辅助设备有限公司

主营:烟台机床排屑机,纸带过滤机,精密过滤罐

免费店铺在线升级

联系方式

磨削油磨床纸带过滤机器,研磨机,抛光机冷却液精密过

2022-02-05 10:36:01  1030次浏览 次浏览
价 格:6500

使用说明书

(OPERATION INSTRUCTIONS)

一. 用途:

纸带过滤机是清除液体中固体粒子的理想设备,如用于磨床及其它机床冷却液(切削液或乳化液)的净化。

本装置主要应用于机械加工过程中冷却润滑液的净化,可配用于:普通精度磨床、精密磨床、组合机床、加工中心等,可有效清除冷却润滑液中的杂质颗粒等,可将磁性杂质连续不断的导入污物箱中,保证冷却液的清洁,防止其变质,全过程连续自动,是各种机床的理想配套附件。同时减轻了工人劳动强度,减少了废冷却液对环境污染。P81031-090231.jpgI. Purpose:

Tape filter is the ideal equipment to clear liquid solid particles, such as for grinding machines and other machines coolant (cutting fluid emulsion) purification.

This device is mainly used in machining process coolant purification, can be equipped for: ordinary precision grinding machines, precision grinding machines, combined machine tools, machining centers, which can effectively remove impurities in the coolant particles can be magnetic impurities continuously introducing the dirt tank, ensure clean coolant to prevent its deterioration, the whole process of continuous automatic, is the ideal tool for a variety of matching accessories. While reducing the labor intensity, reducing the waste coolant to environmental pollution.磁性纸带过滤机7.JPG二. 主要零部件及工作原理

本排屑装置主要由箱体、减速电机、液位控制感应器、主轴、链网、污物车、机床供给泵等组成。工作原理:机床使用后的冷却液通过网口分配器(防止损坏滤纸)流入纸带过滤机,经无纺布过滤流入净水箱,脏颗粒在无纺布上不断积聚与无纺布形成高密度的过滤层同时提高了过滤精度。随着时间推移过滤效率下降,引起液位控制感应器浮球升高,当液位达到设置的感应位置时,液位浮动开关控制马达起动,并带动输送链转动,输送链托起过滤布一起转动,废弃过滤布被输送到污箱,干净的无纺布重新布置,一个工作周期行程,设备以此周而复始的工作。过滤后的冷却液被输送泵重新输送回机床循环用。该装置外形简洁,体积小,重量轻,安装使用方便。

II. The main components and working principle

The chip device consists of housing, gear motor, level control sensor, spindle, chain network, dirt cars, machine tool supply pump and other components. How it works: After using the machine coolant through the network port splitter (to prevent damage to the filter paper) into the paper tape filter, the net inflow of non-woven filter tank, dirt particles continue to accumulate in the non-woven and non-woven form high density filter layer while improving the filtering accuracy. Decreased filtration efficiency over time, causing increased float level control sensors, inductive position when the level reaches set level float switch to control the motor start to rotate and drive the conveyor, conveyor filter cloth hold together rotation, the waste is delivered to the filter cloth dirt tank and clean nonwoven rearranged a work cycle trip, this cycle of work equipment. Coolant filtration pump after being transmitted back into the machine circulation. This means simple shape, small size, light weight, easy to install.

三. 型号规格及性能(见表1.表2)

网友评论
0条评论 0人参与
最新评论
  • 暂无评论,沙发等着你!
百业店铺 更多 >

特别提醒:本页面所展现的公司、产品及其它相关信息,均由用户自行发布。
购买相关产品时务必先行确认商家资质、产品质量以及比较产品价格,慎重作出个人的独立判断,谨防欺诈行为。

回到顶部